80 Nm Arm

80 Nm Arm

80 Nm Arm

This two piece, light-duty torque arm can rotate 360 degrees on both pivots, has outstanding & adjustable horizontal and vertical coverage, is pneumatically controlled with a single precision regulator that can balance tools up to 13.6 kg (30 lb) at the end of the arm and handle torque reactions up to 80 Nm (60 ft-lb). The unit features roller bearings for smooth operation and an adjustable pivot spring to automatically return the arm to a "home" position after use.


  • Arm length

    Two piece arm legth adjustable between 86.4 to 106.7 cm (34 to 42 in)

  • Work Envelope

    Covers a 61 x 76.2 cm (24 x 30 in) horizontal rectangular work envelope

  • Annodized aluminum construction

    Anti-corrosive and durable construction.

  • Parallel link arm

    Outer portion of the arm is a dual parallel link arm designed for 50 cm (20 in) of vertical travel

  • Tool holder

    The tool holder can handle tool diameters from .5 in (12.7 mm) up to 2.5 in (63.5 mm) and is adjustable for horizontal or vertical tool orientations. It can be ordered for bi-directional tilt (p/n 54033162) or single-directional tilt (p/n 54033196).

  • Mounting Plates

    Mounting plates allow the unit to be mounted to a bench, wall, column or ceiling etc.


© 2016 Ingersoll Rand. All rights reserved.