Ingersoll Rand | 感測器

Calibration,EXT,EXTA,EXPERT,Torque,Tester,Analyzer,ETA,ETT,EXTT,ETW,transducer,quality

感測器

專業級的傳感器具有固定和旋轉樣式,可以配接頭套裝。

固定感測器能夠安裝在操作臺或車上,適用範圍1.5到1000牛米(1.1到738 ft-lb)。

旋轉感測器能在接頭上使用,並帶有專利技術的纏繞刷系統,從而降低噪音信號以及減少連接的斷開。

有三種感測器類型可選:工業標準型,智慧型和智慧角度型。工業標準型能在其他符合工業標準的設備上使用。智慧型能在專業級分析儀中自動識別並方便設置。智慧角度型包含了一個編碼器用於測量角度。

Features

  • 0.1 to 500 Nm (1 in-lb to 370 ft-lb)
  • Use on an actual joint or on a Joint Simulator
  • Choose between Smart or Industry Standard types
  • Smart Rotary Transducers are available in Torque Only or Torque + Angle versions

 

Stationary Transducers

  • 1.5 to 1000 Nm (1.1 to 738 ft-lb)
  • Use with a Joint Simulator
  • Choose between Smart or Industry Standard types
  • Smart Stationary Transducers are available in Torque Only versions
  • JKST models combine an Industry Standard Transducer and a Joint Simulator

    (see Joint Simulators)

 


© 2016 Ingersoll Rand. All rights reserved.