ZA Balancers

ZA Balancers

ZA Balancers

The Ingersoll Rand “ZA” series balancer is the most common, and is designed for high speed, precision handling of variable weight loads. Up/down movement is accomplished through the use of an ergonomically designed pendant with low-effort, color coded thumb levers.
After positioning the load with the pendant control, the unit defaults into a “Float” mode that allows the operator up to 18 in (457 mm) to manually adjust the load for final positioning.

Features

  • Pendant Control

    Ergonomic Up/Down pendant control for variable speed and feathering of load

  • Safety

    If the air supply is ever interrupted, the unit will maintain the load in the suspended position

  • Standard emergency cable retract brake

    If the load is accidentally lost, a spring loaded centrifugal brake automatically stops the rapid upward cable travel

  • Standard overload protection

    The load being lifted can never exceed the unit’s maximum rated capacity at a given air pressure

  • Optional down stop

    Eliminates the down-drift of suspended loads within 6 inches (152 mm) if air supply is shut down

  • Cable travel

    Length of wire rope up to 30 ft (9.1 mm) with cable travel up to 120 inches (3048 mm) depending on model and configuration

  • Suspension kits

    Suspension kits are available for virtually all enclosed track manufacturers, as well as I-beam, Patented/Hardened track, and Hook mounted configurations

 


Document Library

TitleDescriptionTechnical Data Sheet (.pdf)
Ergonomic Handling Systems - IRITS-0309-035Ergonomic Handling Systems CatalogIRITS-0309-035-ErgoHandlingSystems_09232013.pdf
© 2016 Ingersoll Rand. All rights reserved.