Series 700C

Series 700C

Series 700C

The 700C Arm is a “banjo” arm consisting of three connecting linkages which allows the boom/balancer combination to cover a large area. The arm can fold into itself and articulate 270 degrees to reach around columns, posts or other interference points. The 700C has a short stack-up, which is useful for low headroom applications because it minimizes interference with the operator. The balancer is mounted at the rear of the arm and pulleys in the center section route the wire rope to the front of the arm. Customer will need to specify balancer type, mounting option, carriage type, arm length and balancer controls when ordering.


  • Articulating boom

    Two-point pivot providing 270º articulation

  • Integral Balancer

    Integrated 150, 200, 350, or 500lb balancer

  • Low inertia

    Rear-mount balancer offers lowest rotational intertia of all models, reducing operator fatigue

  • Low profile

    Short stack-up for low headroom applications

  • Flexible mounting

    Carriage mounted for overhead rail transfer applications or column mounted for stationary applications

  • Flexible reach

    Arm lengths of 6 ft (1.83 m), 7 ft (2.13 m), 8 ft (2.44 m), 9 ft (2.74 m), and 10 ft (3.05 m) available


Document Library

TitleDescriptionTechnical Data Sheet (.pdf)
Ergonomic Handling Systems - IRITS-0309-035Ergonomic Handling Systems CatalogIRITS-0309-035-ErgoHandlingSystems_09232013.pdf
© 2016 Ingersoll Rand. All rights reserved.