Series 713

articulating arm

Series 713

The 713 arm is very useful in areas with limited space. It incorporates an over-under boom design with two linkages and two pivots. One pivot is between the mounting point and main boom and the other is between the two booms. Each pivot can rotate 360 degrees, which allows the operator full coverage of the work area, including directly under the carriage. The balancer is mid-mounted and pulleys in the center section route the wire rope to the front of the arm. Customer will need to specify balancer type, mounting option, carriage type, arm length and balancer controls when ordering.


  • Articulating boom

    Over-under boom design with single pivot point for 360° articulation

  • Integral balancer

    Integrated 150 lb (65 kg), 200 lb (90 kg), 350 lb (155 kg), or 500 lb (225 kg) balancer

  • Flexible mounting

    Carriage mounted for overhead rail transfer applications or column mounted for stationary applications

  • Flexible reach

    Arm lengths of 6 ft (1.83 m), 7 ft (2.13 m), 8 ft (2.44 m), 9 ft (2.74 m), and 10 ft (3.05 m) available


Document Library

TitleDescriptionTechnical Data Sheet (.pdf)
Ergonomic Handling Systems - IRITS-0309-035Ergonomic Handling Systems CatalogIRITS-0309-035-ErgoHandlingSystems_09232013.pdf
© 2016 Ingersoll Rand. All rights reserved.